OilLab 6000 – Leonardo Pensky Martens
Flash Point on petroleum products, gas oils, fuel oils, lubrificants, biodiesel. Suitable for flash point detection on different substances, waste materials, solvents…
Measuring Pensky Martens Principle
The sample is heated and stirred at specified rates, using one of three defined procedures (A, B, or C). An ignition source is directed into the test cup at regular intervals with simultaneous interruption of the stirring, until a flash is detected.
Measuring Parameters
- Temperatures: in °C / °F
- Measuring range: 0°C … +420°C
- Resolution: 0.01 °C
- Accuracy: ± 0.1 °C
- Repeatability / Reproducibility: as per standards methods or better
Measuring Temperature Devices
- Sample temperature: PT100 sensor completely made in stainless steel resistant to corrosion and shock resistant
- Bath temperature: PT100 sensor
Pressure sensor
- Built-in sensor with automatic correction of results to a barometric pressure of 101.3 kPa automatically performed by the software at the end of analysis
Detection system
- A single multi-detector combines the ionization detector and the thermal detector
Double ignition system
- Gas
- Ectrical ignitor
Heater
- Electrical heating with heating rates as per procedures A, B, C
Stirrer
- An electric motor drives the stirring of the product
- Stirring speed as per selected procedures A, B, C
Cooling system
- Built-in forced air fan
Safety Devices
- Automatic diagnostic in case of breakage of the sample temperature probe and thermal sensors
- Automatic fire detection system
- Overheating protection with auto shut off during the test
- Gas valve for closing the gas supply (max 30 mBar), at the end of the test
Fire Extinguisher
- Automatic fire detection and extinguisher system
Software Features
- All analytical parameters recorded
- Customizable analysis parameters and methods
- Customizable results report
- Printable graphs and results